Configuration Procedure (Windows 2000/Xp); Installing The Printer (Windows 2000/Xp) - Minolta PI4700E User Manual

LPR Printing

Configuration Procedure (Windows 2000/XP)

1
Install TCP/IP under Windows 2000/XP.
Refer to the applicable Windows documentation for more information.
2
Assign the IP parameters.
See "3.2 Specifying the IP Address From the Printer's Touch Panel"
(p. 3-2) for more information.
3
Use the procedure below to install the printer.

Installing the printer (Windows 2000/XP)

1
Install the printer driver following the instructions that come with the in-
staller. Make the new printer the default printer.
2
Right-click the new printer icon and select
3
Display the
4
Click Add
This displays a list of available port types.
5
Select Standard TCP/IP Port
This starts
6
Click Next
7
On the
the Printer Name or IP Address
If the network you are on uses DNS (Domain Name Services), type in
the DNS name instead of the IP address.
8
Type the name of the port you want into the
click Next.
Note
When you type the IP address into the
box, the name of the port is automatically entered in the
box as IP_<IP address>, but you can change the port name as you
want.
Pi4700e
Ports tab.
Port.
Add Standard TCP/IP Printer Port
on the introduction page of the wizard.
Add Port page, type the IP address of the Network Card into
Properties
from the list, and then click
Wizard.
box.
Port Name
Printer Name or IP Address
3
from the menu.
New Port.
box, and then
Port Name
3-19