Minolta PI4700E User Manual page 74

Specifying network settings from PageScope Light
NetWare Configuration
Sub-menus appear when you click the
the Network
interface card settings for NetWare printing.
NetWare Setting
This screen appears when you click the
der the NetWare Configuration
NetWare environment settings.
Password
Enable NetWare
Print Server Name
Print Server Password
Pi4700e
tab. Use the sub-menus to display and configure the network
Input the password assigned to the network interface card. The
initial factory default is sysadm. Clicking the
inputting the wrong password displays a password error mes-
sage without changing the settings.
Check this option to enable IPX/SPX on the network interface
card. The NetWare environment is disabled while this option is
unchecked.
Input the print server name you want. The default print server
name when this field is left blank is: MLT_<Network Interface
Card serial number>.
When you want to use a password for logging into the network
interface card, type the password you want to specify into the
field. Type the same password into the
for confirmation. The password you specify must be the same
as the bindery and NDS-based print server password.
NetWare Configuration
NetWare Setting
menu. It lets you change a number of
3
menu on
sub-menu un-
Apply button after
Password Retype field
3-27