Specifying network settings from PageScope Light
Maintenance
This screen appears when you click the
work
tab. Use this screen to restore the network interface card to its initial
factory default settings.
Password
Restore Factory Defaults
Note
After performing a Reset or Maintenance, turn the digital copier off,
then on again.
Pi4700e
Maintenance
Input the password assigned to the network interface card. The
initial factory default is sysadm. Clicking the
inputting the wrong password displays a password error mes-
sage without changing the settings.
Click the
Restore
button to restore the network interface card
to its initial factory defaults.
3
menu on the
Net-
Apply
button after
3-35