Minolta PI4700E User Manual page 237

8
Confirming the Bindery Context
Before installing the Network Card under Novell NetWare 4.x in the bind-
ery emulation mode, you should first confirm whether the server has a
bindery context (name assigned to the server by the bindery services
mode). If it doesn't, install in the NDS mode.
Bindery context is required to install the Network Card in the bindery em-
ulation mode. Use the following procedure to confirm whether your server
has bindery context.
1
On the NetWare 4.x server, type:
load install
2
Select Maintenance/Selective Install
3
On the
4
From the menu of available NCF file options, select
EC.NCF.
5
Search the file and check to see if it contains a statement similar to the
one shown below.
SET BINDERY CONTEXT=OU=ENG
OU=ENG
context in place of OU=ENG.
6
At the console prompt, type the
exactly as you entered it in your AUTOEXEC.NCF file.
Note
The command you type at the console prompt takes effect immediate-
ly. The contents defined in the AUTOEXEC.NCF file take effect when
the server is shut down and then restarted.
8-6
Enter
Installation Options
is an example file server context. Use your own file server
NetWare configuration
from the menu.
menu, select NCF File
SET BINDER CONTEXT
Options.
Edit AUTOEX-
statement
Pi4700e