Table of Contents
Advertisement
Print options
Finishing Settings
The
Finishing Settings
bilities, including sort, staple, punch, and folding, for those occasions
when you need to make multiple complete sets of the original document.
(1)
OutputBins <only when Mailbin Finisher is mounted>
Select the machine exit tray into which the prints are to be fed.
Available options are limited by the type of finishing option configured with the ma-
chine.
Setting range: Auto, Bin1 to Bin5
(2)
Staple <only when Multi-staple Finisher, Single-staple Finisher, Mailbin Finisher or
Folding finisher is mounted>
Select whether to staple each copy set of the document.
• Off
• Corner
• Short Edge
• Long Edge
• Center
(3)
Punch <only when Multi-staple Finisher, Mailbin Finisher or Folding Finisher is
mounted>
Select whether to punch holes in the printed pages.
• Off
• Short Edge
• Long Edge
(4)
Folding <only when Folding Finisher is mounted>
Set the folding functions for finishing.
• Off
• Crease
Pi4700e
property sheet allows you to set finishing capa-
Does not staple the printed pages.
Staples together each copy set at its corner.
<only when Multi-staple Finisher or Folding Finisher is
mounted> Stapled along the short edge of the docu-
ment.
<only when Multi-staple Finisher or Folding Finisher is
mounted> Stapled along the long edge of the docu-
ment.
<only when Folding Finisher is mounted> Stapled at
the center of the document.
Does not punch holes.
Punches holes along the short edge of the document.
Punches holes along the long edge of the document.
Does not fold the printed page.
Makes a crease in the printed page.
6
(1)
(2)
(3)
(4)
6-37
Advertisement
Table of Contents
Troubleshooting
