Minolta PI4700E User Manual page 276

Using the utility software
G
Delay in minutes for first message
Specifies the amount of time a print job is delayed, in minutes, after
which the Network Cards concludes an error has occurred and sends
a notification message. The default value for this setting is 5 minutes,
and the setting range is 1 to 60 minutes.
G Delay in minutes for repeat messages
Specifies the amount of time a print job is delayed a second or subse-
quent times, in minutes, after which the Network Card concludes an
error has occurred and sends a notification message. The default val-
ue for this setting is 30 minutes, and the setting range is 1 to 60 min-
utes.
Pi4700e
8
8-45