Linux; Configuring The Printer Using The Printtool Command - Minolta PI4700E User Manual

UNIX Configuration
Note
Do not input a space after the remote host name.
Enable <local printer name>
Accept <local printer name>

Linux

With Red Hat Print System Manager, you can configure the printer on a
graphical setup screen. See Configuring the Printer Using the printtool
Command for more information.
If your system does not have Red Hat Print System Manager installed,
you can configure the printer by editing the contents of the
/etc/printcap file. See Configuring the Printer by Editing the printcap File
for more information.

Configuring the Printer Using the printtool Command

1
Start x terminal.
2
At the command prompt, enter the
the Red Hat Print System Manager
3
Click the
This causes the
4
Choose
This causes the
5
Specify the printer name.
6
Select or add the spool directory (typically, /usr/spool/lpd/<printer
name>)
7
In the Remote Host
Card.
8
In the Remote Queue
9
Optionally, specify an input filter.
10
When you finish, click OK.
Pi4700e
Add button.
Add Printer Entry
Remote Unix (lpd) Queue
Edit Remote Unix Queue Entry
field, specify the IP address of the Print Server
field, specify PORT1.
printtool command. This causes
window to appear.
window to appear.
and click OK.
window to appear.
12
12-39