Aix 4.0; Hp-Ux - Minolta PI4700E User Manual

12

AIX 4.0

Use the following procedure to install a Network Card on an AIX 4.0 sys-
tem.
1
Run SMIT Printer.
2
Select Print
3
Select Add a Print
4
Select Remote.
5
Use Standard
6
Assign the queue name.
7
Use the Network Card host address for Remote System.
8
Assign an appropriate name (like PORT1) for the queue on the remote
system.
9
Type in a description of the printer. This information is optional.
10
Press
11
Execute the following command to produce a test print.
lp -d<queue name> <file name>
Configuration complete if the test prints without any problems.

HP-UX

Use the following procedure to set up a remote computer on the host that
sends jobs to a Network Card using Network Card lpd.
1
At the prompt, type:
sam
2
On the window that appears, select
3
On the menu, select
4
On the list that appears, select
lect Add Remote Printer
12-34
Spooling.
Queue.
Processing.
to apply what you have input and create the queue.
Enter
List printer and
on the menu that appears.
UNIX Configuration
Printer/Plotter
plotters.
Actions from the title bar and then se-
Manager.
Pi4700e