Table of Contents
Advertisement
5
Functions of the Detail of Output Setting Dialog Box
Settings can also be made for finishing functions including stapling, hole
punching, and folding.
(1)
(2)
(1)
Staple <when Mailbin Finisher, Single-staple Finisher, Multi-staple Finisher or Fold-
ing Finisher is installed>
This function allows you to staple one set of printed documents at a time.
• Off
• Corner
• Long Edge
• Short edge
• Center
(2)
Punch <when Mailbin Finisher, Multi-staple Finisher or Folding Finisher is installed>
This function allows you to punch holes in the printed document.
• Off
• Short Edge
• Long Edge
• Punch Holes
<Inch area only>
(3)
Folding <when Folding Finisher is installed>
Select the desired paper folding function.
• Off
• Just Output Size [Z-
Fold]
• Half Folding
• Crease
5-28
Printed documents are not stapled.
Printed documents are stapled at their corners.
<when Multi-staple Finisher or Folding Finisher is in-
stalled>
The documents are stapled along the long edge.
<when Multi-staple Finisher or Folding Finisher is in-
stalled>
The documents are stapled along the short edge.
<when Folding Finisher is installed>
The documents are stapled at the center.
The document is not punched.
The document is punched along the short edge.
The document is punched along the long edge
Set the number of holes to be punched.
Printed pages are not folded.
Printed pages are folded into three parts.
Printed pages are folded in two at their center.
A crease is made in printed pages.
Properties settings
(3)
Pi4700e
Advertisement
Table of Contents
Troubleshooting
