Dec Ultrix 4.3 Risc, Osf1/Alpha - Minolta PI4700E User Manual

12

DEC ULTRIX 4.3 RISC, OSF1/ALPHA

Use the following procedure to set up a remote printer on the host that
sends jobs to a Network Card.
1
At the prompt, type:
lprsetup
2
Select add.
3
Type a printer name and then press
4
When the following message appears, press
"Do you want more information on specific printer types?"
5
This displays a list of printers supported by ULTRIX. Type the follow-
ing:
remote
6
Type the printer synonym (alias) and then press
7
Specify the spooler directory and then press
If you want to use the default spooler directory shown on the screen,
press
8
Specify the remote system name and then press
9
Type an appropriate name (like PORT1) for the remote system printer,
and then press
10
From the list that appears on the display, select the printcap symbol
name. Next, type the following.
Q
Enter
11
This displays the configuration. If it is correct, type Y. If something is
wrong, type N.
The following table shows some sample settings.
Item
lp (line printer)
rm (remote host)
rp (remote printer)
sd (spooler directory)
12-36
Enter
without inputting anything.
Enter
.
Enter
Type
STR
STR
STR
STR
UNIX Configuration
.
Enter
.
Enter
Enter
.
Enter
Enter
Input Data Description
Network Card host name
PORT1 (You can use any name you want
here.)
/usr/spool/lpd7
.
.
Pi4700e