Minolta PI4700E User Manual page 186

Print options
Tip for (12)
The covers have data printed on them.
No back covers are available.
(13)
(14)
(14)
(15)
(13) Access Number
If the copy track function is to be used, enter a four-digit access number. An access
number is attached to each printing job, enabling you to carry out management at the
machine. In order to use this function, copy track function must be set at the machine.
When the copy track function is set at the machine, printing may sometimes fail to
take place until the access number designated at the machine is correctly set.
Enter the access number set in the machine.
Setting range: 0 to 9 for each box
(14) Password
If Lock Job is to be used, enter a four-digit lock job password. Entering
digits indicates that there is no password.
A locked printing job will be printed when it is unlocked using the Job List display on
the panel of the machine. In this case, a password is necessary.
Enter the password of the lock job.
Setting range: 0 to 9 for each box
Pi4700e
6
0 for all four
6-31