Figure 19: Snmp System Configuration - LevelOne GEL-2670 User Manual

| Configuring the Switch
C 4
HAPTER
Configuring Security

Figure 19: SNMP System Configuration

S SNMP 3 C
ETTING V OMMUNITY
Use the SNMPv3 Community Configuration page to set community access
strings. All community strings used to authorize access by SNMP v1 and
v2c clients should be listed in the SNMPv3 Communities Configuration
table. For security reasons, you should consider removing the default
strings.
P
ATH
Advanced Configuration, Security, Switch, SNMP, Communities
P
ARAMETERS
These parameters are displayed:
Community - Specifies the community strings which allow access to
◆
the SNMP agent. (Range: 1-32 characters, ASCII characters 33-126
only; Default: public, private)
For SNMPv3, these strings are treated as a Security Name, and are
mapped as an SNMPv1 or SNMPv2 community string in the SNMPv3
Groups Configuration table (see
page 79).
– 76 –
A S
CCESS TRINGS
"Configuring SNMPv3 Groups" on