Showing Igmp Snooping Information; Showing Igmp Snooping Status - LevelOne GEL-2670 User Manual

S IGMP S
HOWING NOOPING
S IGMP
HOWING
S S
NOOPING TATUS
Hardware Filter/Switch – Indicates whether the data plane destined
◆
to the specific group address from the source IPv4 address can be
handled by the chip or not.
W I
EB NTERFACE
To display MVR Source-Filtered Multicast Information, click Monitor, MVR,
MVR SFM Information.
Figure 131: MVR SFM Information
I
NFORMATION
Use the IGMP Snooping pages to display IGMP snooping statistics, port
members of each service group, and information on source-specific groups.
Use the IGMP Snooping Status page to display IGMP querier status,
snooping statistics for each VLAN carrying IGMP traffic, and the ports
connected to an upstream multicast router/switch.
P
ATH
Monitor, IPMC, IGMP Snooping, Status
P
ARAMETERS
These parameters are displayed:
Statistics
◆ VLAN ID – VLAN Identifier.
Querier Version – IGMP version used by the switch when serving as
◆
the IGMP querier.
Host Version – IGMP version used when used by this switch when
◆
serving as a host in IGMP proxy mode.
◆ Querier Status – Shows the Querier status as "ACTIVE" or "IDLE."
When enabled, the switch can serve as the Querier, which is responsible
for asking hosts if they want to receive multicast traffic.
Querier Transmitted – The number of transmitted Querier messages.
◆
Querier Received – The number of received Querier messages.
◆
– 267 –
| Monitoring the Switch
C 5
HAPTER

Showing IGMP Snooping Information