Configuring Storm Control; Figure 87: Qos Control List Configuration - LevelOne GEL-2670 User Manual

| Configuring the Switch
C 4
HAPTER
Quality of Service
Click Save.
4.

Figure 87: QoS Control List Configuration

Use the Storm Control Configuration page to set limits on broadcast,
C S
ONFIGURING TORM
multicast and unknown unicast traffic to control traffic storms which may
C
ONTROL
occur when a network device is malfunctioning, the network is not properly
configured, or application programs are not well designed or properly
configured. Traffic storms caused by any of these problems can severely
degrade performance or bring your network to a complete halt.
You can protect your network from traffic storms by setting a threshold for
broadcast, multicast, or unknown unicast traffic. Any packets exceeding
the specified threshold will then be dropped. Note that the limit specified
on this page applies to each port.
P
ATH
Configuration, QoS, Storm Control
– 211 –