LevelOne GEL-2670 User Manual page 40

24 ge + 2 ge sfp l2 managed switch
Table of Contents

Advertisement

| Using the Web Interface
C
3
HAPTER
Navigating the Web Browser Interface
Table 4: Main Menu (Continued)
Menu
Description
PVLAN
Configures PVLAN groups
Membership
Port Isolation
Prevents communications between designated ports within
the same private VLAN
VCL
VLAN Control List
MAC-based VLAN
Maps traffic with specified source MAC address to a VLAN
Protocol-based
VLAN
Protocol to
Creates a protocol group, specifying supported protocols
Group
Group to VLAN
Maps a protocol group to a VLAN for specified ports
IP Subnet-based
Maps traffic for a specified IP subnet to a VLAN
VLAN
Voice VLAN
Configuration
Configures global settings, including status, voice VLAN ID,
VLAN aging time, and traffic priority; also configures port
settings, including the way in which a port is added to the
Voice VLAN, and blocking non-VoIP addresses
OUI
Maps the OUI in the source MAC address of ingress packets
to the VoIP device manufacturer
QoS
Port Classification
Configures default traffic class, drop priority, user priority,
drop eligible indicator, classification mode for tagged frames,
and DSCP-based QoS classification
Port Policing
Controls the bandwidth provided for frames entering the
ingress queue of specified ports.
Port Scheduler
Provides overview of QoS Egress Port Schedulers, including
the queue mode and weight; also configures egress queue
mode, queue shaper (rate and access to excess bandwidth),
and port shaper
Port Shaping
Provides overview of QoS Egress Port Shapers, including the
rate for each queue and port; also configures egress queue
mode, queue shaper (rate and access to excess bandwidth),
and port shaper
Port Tag
Provides overview of QoS Egress Port Tag Remarking; also
Remarking
sets the remarking mode (classified PCP/DEI values, default
PCP/DEI values, or mapped versions of QoS class and drop
priority)
Port DSCP
Configures ingress translation and classification settings and
egress re-writing of DSCP values
DSCP-Based QoS
Configures DSCP-based QoS ingress classification settings
DSCP Translation
Configures DSCP translation for ingress traffic or DSCP re-
mapping for egress traffic
DSCP
Maps DSCP values to a QoS class and drop precedence level
Classification
QoS Control List
Configures QoS policies for handling ingress packets based
on Ethernet type, VLAN ID, TCP/UDP port, DSCP, ToS, or
VLAN priority tag
Storm Control
Sets limits for broadcast, multicast, and unknown unicast
traffic
– 40 –
Page
179
181
181
183
183
185
186
187
188
190
191
192
194
196
198
199
202
204
205
206
207
211

Advertisement

Table of Contents
loading

Table of Contents