Configuring Mvr Channel Settings - LevelOne GEL-2670 User Manual

3.
4.
5.
Figure 54: Configuring General MVR Settings
Use the MVR Channel Configuration page to view dynamic multicast group
C MVR
ONFIGURING
bindings for a multicast VLAN, or to configure static bindings for a multicast
C S
HANNEL ETTINGS
VLAN.
P
Advanced Configuration, MVR (
C
◆
◆
◆
Click "Add New MVR VLAN," enter MVR VLAN ID, set the operating
mode to control whether or not membership reports are sent from
source ports, specify whether or not control frames are tagged with the
MVR ID, set the priority and last member query interval.
Optionally enable immediate leave on any receiver port to which only
one subscriber is attached.
Click Save.
ATH
U
OMMAND SAGE
Use the Navigate Channel Setting fields to specify the MVR VLAN and
number of entries to display per page. Then use the arrow keys to scroll
through the list of associated channels.
Static bindings should only be used to receive long-term multicast
streams associated with a stable set of hosts
Only IGMP version 2 or 3 hosts can issue multicast join or leave
messages. If MVR must be configured for an IGMP version 1 host, the
– 149 –
| Configuring the Switch
C 4
HAPTER
Multicast VLAN Registration
MVR Channel Configuration)