Table of Contents
Advertisement
WAB–3000 Wireless Access Point
System Configuration
General
You will immediately be directed to the System Configuration —
General screen for the WAB–3000 access point.
This screen lists the firmware version number for your WAB–3000 and
allows you to set the Host Name and Domain Name as well as establish
system date and time. (Host and Domain Names are both set at the fac-
tory for "default" but can optionally be assigned a unique name for each.)
You can also enter a description of the physical location of the unit in the
Description field. This is useful when deploying units to remote lcoations.
To set the date and time, you can do it manually or set it based on the
NTP server.
Also, you can modify the terms and conditions login banner on the
login screen. The default is "This device is for authorized use only. Any
unauthorized use of this product is prohibited."
When you are satisfied with your changes, click Apply.
Go next to the System Configuration — Operating Mode page.
26
Chapter 3: Access Point Configuration
29000171-002 A
Advertisement
Table of Contents
