LevelOne GEL-2670 User Manual page 200

| Configuring the Switch
C 4
HAPTER
Quality of Service
P
ATH
Advanced Configuration, QoS, Port Tag Remarking
P
ARAMETERS
These parameters are displayed:
Displaying Port Remarking Mode
Port – Port identifier.
◆
◆ Mode – Shows the tag remarking mode used by this port:
Classified – Uses classified PCP (Priority Code Point or User
■
Priority) and DEI (Drop Eligible Indicator) values.
Default – Uses default PCP/DEI values.
■
Mapped – Uses mapped versions of QoS class and drop precedence
■
level.
Configuring Port Remarking Mode
Tag Remarking Mode – Configures the tag remarking mode used by
◆
this port:
Classified – Uses classified PCP/DEI values.
■
Default – Uses default PCP/DEI values.
■
(Range: PCP – 0-7, Default: 0; DEI – 0-1, Default: 0)
Mapped – Controls the mapping of the classified QoS class values
■
and DP levels (drop precedence) to (PCP/DEI) values.
QoS class/DP level – Shows the mapping options for QoS class
■
values and DP levels (drop precedence).
PCP – Remarks matching egress frames with the specified
■
Priority Code Point (or User Priority) value. (Range: 0-7;
Default: 0)
DEI – Remarks matching egress frames with the specified Drop
■
Eligible Indicator. (Range: 0-1; Default: 0)
W I
EB NTERFACE
To show the QoS Egress Port Tag Remarking mode used for each port:
Click Advanced Configuration, QoS, Port Tag Remarking.
1.
Click on any enter under the Port field to configure the Port Tag
2.
Remarking mode.
– 200 –