LevelOne GEL-2670 User Manual page 310

24 ge + 2 ge sfp l2 managed switch
Table of Contents

Advertisement

G
LOSSARY
IGMP Q
UERY
IGMP P
ROXY
IGMP S
NOOPING
I
-B
M
N
AND
ANAGEMENT
IP M
F
ULTICAST
ILTERING
IP P
RECEDENCE
LACP
L
2
AYER
L
A
INK
GGREGATION
LLDP
On each subnetwork, one IGMP-capable device will act as the querier —
that is, the device that asks all hosts to report on the IP multicast groups
they wish to join or to which they already belong. The elected querier will
be the device with the lowest IP address in the subnetwork.
Proxies multicast group membership information onto the upstream
interface based on IGMP messages monitored on downstream interfaces,
and forwards multicast traffic based on that information. There is no need
for multicast routing protocols in an simple tree that uses IGMP Proxy.
Listening to IGMP Query and IGMP Report packets transferred between IP
Multicast Routers and IP Multicast host groups to identify IP Multicast
group members.
Management of the network from a station attached directly to the
network.
A process whereby this switch can pass multicast traffic along to
participating hosts.
The Type of Service (ToS) octet in the IPv4 header includes three
precedence bits defining eight different priority levels ranging from highest
priority for network control packets to lowest priority for routine traffic. The
eight values are mapped one-to-one to the Class of Service categories by
default, but may be configured differently to suit the requirements for
specific network applications.
Link Aggregation Control Protocol. Allows ports to automatically negotiate
a trunked link with LACP-configured ports on another device.
Data Link layer in the ISO 7-Layer Data Communications Protocol. This is
related directly to the hardware interface for network devices and passes
on traffic based on MAC addresses.
See Port Trunk.
Link Layer Discovery Protocol is used to discover basic information about
neighboring devices in the local broadcast domain by using periodic
broadcasts to advertise information such as device identification,
capabilities and configuration settings.
– 310 –

Advertisement

Table of Contents
loading

Table of Contents