C
G
ONFIGURING
LOBAL AND
Use the ARP Inspection Configuration page to enable ARP inspection
globally for the switch and for any ports on which it is required.
P
ATH
Advanced Configuration, Security, Network, ARP Inspection, Configuration
P
ARAMETERS
These parameters are displayed:
Global Configuration
Mode – Enables Dynamic ARP Inspection globally. (Default: Disabled)
◆
Translate dynamic to static – Click to translate all dynamic entries to
◆
static entries.
Port Mode Configuration
◆
Port – Port identifier
Mode – Enables Dynamic ARP Inspection on a given port. Only when
◆
both Global Mode and Port Mode on a given port are enabled, will ARP
Inspection be enabled on a given port. (Default: Disabled)
W
I
EB
NTERFACE
To configure global and port settings for ARP Inspection:
Click Advanced Configuration, Security, Network, ARP Inspection,
1.
Configuration.
Enable ARP inspection globally, and on any ports where it is required.
2.
Click Save.
3.
Figure 39: Configuring Global and Port Settings for ARP Inspection
– 121 –
C
4
HAPTER
P
S
ARP I
ORT
ETTINGS FOR
| Configuring the Switch
Configuring Security
NSPECTION