LevelOne GEL-2670 User Manual page 43

Table 4: Main Menu (Continued)
Menu Description
IPv4 SFM Displays IGMP Source-Filtered Multicast information
Information including group, filtering mode (include or exclude), source
address, and type (allow or deny)
MLD Snooping Multicast Listener Discovery Snooping
Status Displays MLD querier status and protocol statistics
Group Displays active MLD groups
Information
IPv6 SFM Displays MLD Source-Filtered Multicast information including
Information group, filtering mode (include or exclude), source address,
and type (allow or deny)
LLDP Link Layer Discovery Protocol
Neighbors Displays LLDP information about a remote device connected
to a port on this switch
LLDP-MED Displays information about a remote device connected to a
Neighbors port on this switch which is advertising LLDP-MED TLVs,
including network connectivity device, endpoint device,
capabilities, application type, and policy
EEE Displays Energy Efficient Ethernet information advertised
through LLDP messages
Port Statistics Displays statistics for all connected remote devices, and
statistics for LLDP protocol packets crossing each port
MAC Table Displays dynamic and static address entries associated with
the CPU and each port
VLANs Virtual LANs
VLAN Membership Shows the current port members for all VLANs configured by
a selected software module
VLAN Port Shows the VLAN attributes of port members for all VLANs
configured by a selected software module which uses VLAN
management, including PVID, VLAN aware, ingress filtering,
frame type, egress filtering, and PVID
VCL VLAN Control List
MAC-based VLAN Displays MAC address to VLAN map entries
sFlow Displays information on sampled traffic, including the owner,
receiver address, remaining sampling time, and statistics for
UDP control packets and sampled traffic
Diagnostics
Ping Tests specified path using IPv4 ping
Ping6 Tests specified path using IPv6 ping
Maintenance
Restart Device Restarts the switch
Factory Defaults Restores factory default settings
Software
Upload Updates software on the switch with a file specified on the
management station
Image Select Displays information about the active and alternate (backup)
firmware images in the switch, and allows you to revert to
the alternate image
– 43 –
| Using the Web Interface
C 3
HAPTER
Navigating the Web Browser Interface
Page
269
270
270
271
272
273
273
274
277
278
280
281
281
282
283
284
287
287
287
289
289
290
290
291