LevelOne GEL-2670 User Manual page 250

24 ge + 2 ge sfp l2 managed switch
Table of Contents

Advertisement

| Monitoring the Switch
C
5
HAPTER
Displaying Information on Authentication Servers
Unknown Types – The number of RADIUS packets of unknown
type that were received from this server on the authentication port.
Packets Dropped – The number of RADIUS packets that were
received from this server on the authentication port and dropped for
some other reason.
Transmit Packets
Access Requests – The number of RADIUS Access-Request
packets sent to this server. This does not include retransmissions.
Access Retransmissions – The number of RADIUS Access-
Request packets retransmitted to this RADIUS authentication
server.
Pending Requests – The number of RADIUS Access-Request
packets destined for the server that have not yet timed out or
received a response. This variable is incremented when an Access-
Request is sent and decremented due to receipt of an Access-
Accept, Access-Reject, Access-Challenge, timeout, or
retransmission.
Timeouts – The number of authentication timeouts to the server.
After a timeout, the client may retry to the same server, send to a
different server, or give up. A retry to the same server is counted as
a retransmit as well as a timeout. A send to a different server is
counted as a Request as well as a timeout.
Other Info
IP Address – IP address and UDP port for the authentication
server.
State – The current state of the server. This field takes one of the
following values:
Disabled – The server is disabled.
Not Ready – The server is enabled, but IP communication is not
yet up and running.
Ready – The server is enabled, IP communication is up and
running, and the RADIUS module is ready to accept access
attempts.
Dead (X seconds left) – Access attempts were made to this
server, but it did not reply within the configured timeout. The
server has been temporarily disabled, but will be re-enabled
when the dead-time expires. The number of seconds left before
this occurs is displayed in parentheses.
Round-Trip Time – The time interval (measured in milliseconds)
between the most recent Access-Reply/Access-Challenge and the
– 250 –

Advertisement

Table of Contents
loading

Table of Contents