D
LLDP I
ISPLAYING
D
LLDP
ISPLAYING
N
EIGHBOR
I
NFORMATION
W
I
EB
NTERFACE
To display MLD Source-Filtered Multicast information, click Monitor, MLD
Snooping, IPv6 SFM Information.
Figure 137: IPv6 SFM Information
NFORMATION
Use the monitor pages for LLDP to display information advertised by LLDP
neighbors and statistics on LLDP control frames.
Use the LLDP Neighbor Information page to display information about
devices connected directly to the switch's ports which are advertising
information through LLDP.
P
ATH
Monitor, LLDP, Neighbors
P
ARAMETERS
These parameters are displayed:
Local Port – The local port to which a remote LLDP-capable device is
◆
attached.
Chassis ID – An octet string indicating the specific identifier for the
◆
particular chassis in this system.
Remote Port ID – A string that contains the specific identifier for the
◆
port from which this LLDPDU was transmitted.
System Name – A string that indicates the system's assigned name.
◆
Port Description – A string that indicates the port's description. If RFC
◆
2863 is implemented, the ifDescr object should be used for this field.
System Capabilities – The capabilities that define the primary
◆
function(s) of the system as shown in the following table:
Table 13: System Capabilities
ID Basis
Other
Repeater
– 273 –
C
HAPTER
Reference
–
IETF RFC 2108
| Monitoring the Switch
5
Displaying LLDP Information