P
These parameters are displayed:
Displaying QoS Egress Port Schedulers
◆
◆
Configuring QoS Egress Port Scheduler, Queue Scheduler and Port Shapers
This configuration page can be access from the Port Scheduler or Port
Shaper page. Refer to the description of these parameters under
"Configuring Egress Port
W
To show an overview of the rate for each queue and port:
1.
2.
Figure 80: Displaying Egress Port Shapers
Use the QoS Egress Port Tag Remarking page to show an overview of QoS
C
P
ONFIGURING
ORT
Egress Port Tag Remarking mode. Click on any of the entries in the Port
R
M
EMARKING
ODE
field to configure the remarking mode using classified PCP/DEI values,
default PCP/DEI values, or mapped versions of QoS class and drop priority.
ARAMETERS
Port – Port identifier.
Shapers – Shows the queue shaper rate and port shaper rate.
I
EB
NTERFACE
Click Advanced Configuration, QoS, Port Shaper.
Click on any enter under the Port field to configure the Port Scheduler
and Shaper.
– 199 –
C
HAPTER
Scheduler".
| Configuring the Switch
4
Quality of Service