Monitoring The Switch; Displaying Basic Information About The System; Displaying System Information - LevelOne GEL-2670 User Manual

5
D B I
ISPLAYING ASIC
D S
ISPLAYING YSTEM
I
NFORMATION
M
ONITORING THE
This chapter describes how to monitor all of the basic functions, configure
or view system logs, and how to view traffic status or the address table.
A
NFORMATION BOUT THE
You can use the Monitor/System menu to display a basic description of the
switch, log messages, or statistics on traffic used in managing the switch.
Use the System Information page to identify the system by displaying the
device name, location and contact information.
P
ATH
Monitor, System, Information
P
ARAMETERS
These parameters are displayed:
System – To configure the following items see
Information" on page
Contact – Administrator responsible for the system.
◆
Name – Name assigned to the switch system.
◆
Location – Specifies the system location.
◆
Hardware
MAC Address – The physical layer address for this switch.
◆
Chip ID – The vendor ID for the switch ASIC.
◆
Time
System Date – The current system time and date. The time is
◆
obtained through an SNTP Server if configured (see
Address" on page
System Uptime – Length of time the management agent has been up.
◆
– 225 –
S
WITCH
S
YSTEM
47.
48.)
"Configuring System
"Setting an IP