Displaying Information On Loop Protection - LevelOne GEL-2670 User Manual

D I
ISPLAYING NFORMATION ON
W I
EB NTERFACE
To display LACP statistics for local ports this switch, click Monitor, LACP,
Port Statistics.
Figure 123: LACP Port Statistics
L P
OOP ROTECTION
Use the Loop Protection Status page to display information on loopback
conditions.
P
ATH
Monitor, Loop Protection
P
ARAMETERS
These parameters are displayed:
Port – Port identifier.
◆
Action – Configured port action, i.e., the response to take when a loop
◆
is detected on a port.
Transmit – Configured port transmit mode, i.e., whether the port is
◆
actively generating loop protection PDUs.
Loops – The number of loops detected on this port.
◆
Status – Current loop protection status of the port, i.e., enabled or no.
◆
Loop – Whether a loop is currently detected on this port.
◆
Time of Last Loop – The time of the last loop event detected.
◆
– 259 –
| Monitoring the Switch
C 5
HAPTER

Displaying Information on Loop Protection