Vlan Port Status - LevelOne GEL-2670 User Manual

| Monitoring the Switch
C 5
HAPTER
Displaying Information About VLANs
VLAN P S
ORT TATUS
Figure 143: Showing VLAN Members
Use the VLAN Port Status page to show the VLAN attributes of port
members for all VLANs configured by a selected software module, including
PVID, VLAN aware, ingress filtering, frame type, egress filtering, and UVID.
Refer to the preceding section for a description of the software modules
that use VLAN management services.
P
ATH
Monitor, VLANs, VLAN Port
P
ARAMETERS
These parameters are displayed:
VLAN User – A software module that uses VLAN management services
◆
to configure VLAN membership and VLAN port settings such as the
PVID or untagged VLAN ID. Refer to the preceding section for a
description of the software modules that use VLAN management
services.
Port – Port Identifier.
◆
PVID – The native VLAN assigned to untagged frames entering this
◆
port.
Port Type - Shows whether or not a port processes the VLAN ID in
◆
ingress frames (Aware or Unaware).
If a port is not VLAN aware, all frames are assigned to the default VLAN
(as specified by the Port VLAN ID) and tags are not removed.
If a port is VLAN aware, each frame is assigned to the VLAN indicated in
the VLAN tag, and the tag is removed.
◆ Ingress Filtering – If ingress filtering is enabled and the ingress port
is not a member of the classified VLAN of the frame, the frame is
discarded.
Frame Type – Shows whether the port accepts all frames or only
◆
tagged frames. If the port only accepts tagged frames, untagged
frames received on that port are discarded.
◆ Tx Tag – Shows egress filtering frame status, indicating whether
frames are transmitted as tagged or untagged.
– 282 –