Displaying Statistics For Dhcp Snooping; Figure 110: Acl Status - LevelOne GEL-2670 User Manual

◆
◆
◆
◆
◆
◆
◆
W
EB
To display ACL status:
1.
2.

Figure 110: ACL Status

Use the DHCP Snooping Port Statistics page to show statistics for various
D
ISPLAYING
types of DHCP protocol packets.
S
TATISTICS FOR
DHCP S
NOOPING
P
ATH
Monitor, Security, Network, DHCP, Snooping Statistics
P
ARAMETERS
These parameters are displayed:
◆
◆
◆
Rate Limiter – Indicates the rate limiter number implemented by the
ACE. The allowed range is 1 to 15.
Port Redirect – Indicates the port redirect operation implemented by
the ACE. Frames matching the ACE are redirected to the listed port.
Mirror - Indicates the port mirror operation implemented by the ACL.
Frames matching the ACE are mirrored to the listed port. (See
"Configuring Local Port Mirroring" on page
CPU – Forwards packet that matched the specific ACE to the CPU.
CPU Once – Forwards first packet that matched the specific ACE to the
CPU.
Counter – The number of times the ACE was matched by a frame.
Conflict – This field shows "Yes" if a specific ACE is not applied due to
hardware limitations.
I
NTERFACE
Click Monitor, Security, Network, ACL Status.
Select a software module from the scroll-down list.
Rx/Tx Discover – The number of discover (option 53 with value 1)
packets received and transmitted.
Rx/Tx Offer – The number of offer (option 53 with value 2) packets
received and transmitted.
Rx/Tx Request – The number of request (option 53 with value 3)
packets received and transmitted.
– 243 –
| Monitoring the Switch
C 5
HAPTER
Displaying Information About Security Settings
213)