Table of Contents
Advertisement
port 1, 2, 3, and 4. The trunk group members is port 1,2, 3 and 4 and port 1, 2,
3, and 4 are all in the VLAN group 1.
System Configuration
You can configure the IP, subnet mask, gateway, and firmware version that
may vary with the factory firmware release period. Click
apply the new configuration.
Firmware Update
You can update the latest firmware version.
1. Contact your vendor or visit our website at http://www.level1.com for the
newest firmware.
2. Download the Bootp server utility from Internet. You may download it from this
link.
http://perso.wanadoo.fr/philippe.jounin/tftpd32.html#Top
please search the Internet or refer to the txt file which compressed with the
firmware file for another effective link.
3. Install the Bootp server utility.
4. Run the Bootp server utility and set the boot file direction to where the new
System Configuration Interface
19
Submit
button to
If this link is invalid,
Advertisement
Table of Contents
