Displaying Lldp Neighbor Eee Information; Figure 139: Lldp-Med Neighbor Information - LevelOne GEL-2670 User Manual

◆
◆
W
EB
To display information about LLDP-MED neighbors, click Monitor, LLDP,
LLDP-MED Neighbors.

Figure 139: LLDP-MED Neighbor Information

Use the LLDP Neighbors EEE Information page to displays Energy Efficient
D LLDP
ISPLAYING
Ethernet information advertised through LLDP messages.
N EEE
EIGHBOR
I
NFORMATION
P
ATH
Monitor, LLDP, EEE
P
ARAMETERS
These parameters are displayed:
◆
◆
◆
◆
◆
Auto-negotiation Capabilities – Shows the link partners MAC/PHY
capabilities.
MAU Type – The operational MAU type of the sending device.
I
NTERFACE
Local Port – The port on this switch which received the LLDP frame.
Tx Tw – The link partner's maximum time that the transmit path can
hold off sending data after de-assertion of Lower Power Idle (LPI)
mode. (Tw indicates Wake State Time)
Rx Tw – The link partner's time the receiver would like the transmitter
to hold off to allow time for it to wake from sleep.
Fallback Receive Tw – The link partner's fallback receive Tw.
A receiving link partner may inform the transmitter of an alternate
desired Tw_sys_tx. Since a receiving link partner is likely to have
discrete levels for savings, this provides the transmitter with additional
information that it may use for a more efficient allocation. Systems that
do not implement this option use a default that is the same as that of
the Receive Tw_sys_tx. (Refer to IEEE 802.3az for further information
on these system variables.)
Echo Tx Tw – The link partner's Echo Tx Tw value.
– 277 –
| Monitoring the Switch
C 5
HAPTER
Displaying LLDP Information