Configuring Vlan Settings For Igmp Snooping And Query - LevelOne GEL-2670 User Manual

| Configuring the Switch
C 4
HAPTER
IGMP Snooping
C VLAN
ONFIGURING
S IGMP
ETTINGS FOR
S Q
NOOPING AND UERY
W I
EB NTERFACE
To configure global and port-related settings for IGMP Snooping:
Click Configuration, IPMC, IGMP Snooping, Basic Configuration.
1.
Adjust the IGMP settings as required.
2.
Click Save.
3.
Figure 56: Configuring Global and Port-related Settings for IGMP Snooping
Use the IGMP Snooping VLAN Configuration page to configure IGMP
snooping and query for a VLAN interface
P
ATH
Advanced Configuration, IPMC, IGMP Snooping, VLAN Configuration
P
ARAMETERS
These parameters are displayed:
VLAN ID - VLAN Identifier.
◆
Snooping Enabled - When enabled, the switch will monitor network
◆
traffic on the indicated VLAN interface to determine which hosts want to
receive multicast traffic. (Default: Enabled)
When IGMP snooping is enabled globally, the per VLAN interface
settings for IGMP snooping take precedence. When IGMP snooping is
disabled globally, snooping can still be configured per VLAN interface,
but the interface settings will not take effect until snooping is re-
enabled globally.
IGMP Querier - When enabled, the switch can serve as the Querier
◆
(on the selected interface), which is responsible for asking hosts if they
want to receive multicast traffic. (Default: Disabled)
– 154 –