Displaying Rmon Alarm Settings; Figure 118: Rmon History Overview - LevelOne GEL-2670 User Manual

W
To display RMON historical samples, click Monitor, Security, Switch, RMON,
History.

Figure 118: RMON History Overview

Use the RMON Alarm Overview page to display configured alarm settings.
D RMON
ISPLAYING
A S
LARM ETTINGS
P
Monitor, Security, Switch, RMON, Alarm
P
These parameters are displayed:
◆
◆
◆
◆
◆
◆
◆
◆
◆
I
EB NTERFACE
ATH
ARAMETERS
ID – Index of Alarm control entry.
Interval – Interval in seconds for sampling and comparing the rising
and falling threshold.
Variable – MIB object to be sampled.
Sample Type – The method of sampling the selected variable and
calculating the value to be compared against the thresholds. For more
information, see "Configuring RMON Alarms" on page
Value – The value of the statistic during the last sampling period.
Startup Alarm – The alarm that may be triggered when this entry is
first set to valid.
Rising Threshold – If the current value is greater than the rising
threshold, and the last sample value was less than this threshold, then
an alarm will be generated.
Rising Index – The index of the event to use if an alarm is triggered
by monitored variables crossing above the rising threshold.
Falling Threshold – If the current value is less than the falling
threshold, and the last sample value was greater than this threshold,
then an alarm will be generated.
– 255 –
| Monitoring the Switch
C 5
HAPTER
Displaying Information on RMON
84.