Displaying The Mac Address Table - LevelOne GEL-2670 User Manual

| Monitoring the Switch
C 5
HAPTER

Displaying the MAC Address Table

D MAC A
ISPLAYING THE
T
DDRESS ABLE
Use the MAC Address Table to display dynamic and static address entries
associated with the CPU and each port.
P
ATH
Monitor, MAC Address Table
P
ARAMETERS
These parameters are displayed:
◆ Start from VLAN # and MAC address # with # entries per page –
These input fields allow you to select the starting point in the table.
Type – Indicates whether the entry is static or dynamic. Dynamic MAC
◆
addresses are learned by monitoring the source address for traffic
entering the switch. To configure static addresses, refer to
the MAC Address Table" on page
◆ VLAN – The VLAN containing this entry.
MAC Address – Physical address associated with this interface.
◆
Port Members – The ports associated with this entry.
◆
W I
EB NTERFACE
To display the address table, click Monitor, MAC Address Table.
Figure 142: MAC Address Table
– 280 –
172.
"Configuring