Activating The Alternate Image - LevelOne GEL-2670 User Manual

A A
CTIVATING THE LTERNATE
While the firmware is being updated, Web access appears to be
C :
AUTION
defunct. The front LED flashes Green/Off at a frequency of 10 Hz while the
firmware update is in progress. Do not reset or power off the device at this
time or the switch may fail to function afterwards.
Figure 153: Software Upload
I
MAGE
Use the Software Image Selection page to display information about the
active and alternate (backup) firmware images in the switch, or revert to
the alternate image.
P
ATH
Maintenance, Image Select
W I
EB NTERFACE
To activate the alternate image:
Click Maintenance, Image Select.
1.
Click Activate Alternate Image.
2.
Figure 154: Software Image Selection
– 291 –
| Performing System Maintenance
C 7
HAPTER

Activating the Alternate Image