Figure 5: Ipv6 Configuration - LevelOne GEL-2670 User Manual

Address – Manually configures a global unicast address by specifying
◆
the full address and network prefix length (in the Prefix field).
(Default: ::192.168.2.10)
◆ Prefix – Defines the prefix length as a decimal value indicating how
many contiguous bits (starting at the left) of the address comprise the
prefix; i.e., the network portion of the address. (Default: 96 bits)
Note that the default prefix length of 96 bits specifies that the first six
colon-separated values comprise the network portion of the address.
Router – Sets the IPv6 address of the default next hop router.
◆
An IPv6 default gateway must be defined if the management station is
located in a different IPv6 segment.
An IPv6 default gateway can only be successfully set when a network
interface that directly connects to the gateway has been configured on
the switch.
W I
EB NTERFACE
To configure an IPv6 address:
Click Configuration, System, IPv6.
1.
Specify the IPv6 settings. The information shown below provides a
2.
example of how to manually configure an IPv6 address.
Click Save.
3.

Figure 5: IPv6 Configuration

– 51 –
| Configuring the Switch
C 4
HAPTER
Setting an IP Address