Show Ip Dhcp Client-Identifier - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Command Mode
Privileged Exec
Command Usage
Example
In the following example, the device is reassigned the same address.
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#exit
Console#ip dhcp restart client
Console#show ip interface
Vlan 1 is Administrative Up - Link Up
Console#
Related Commands
ip address (538)
show ip dhcp
This command shows the DHCP client identifier for all interfaces.
client-identifier
Command Mode
Privileged Exec
Command Usage
This command is only supported for the EX-3548.
Example
Console#show ip dhcp client-identifier
Interface
---------
VLAN1
VLAN2
VLAN3
ES-3052G#
This command issues a BOOTP or DHCP client request for any IP interface that
has been set to BOOTP or DHCP mode through the
DHCP requires the server to reassign the client's last address if available.
If the BOOTP or DHCP server has been moved to a different domain, the
network portion of the address provided to the client will be based on this new
domain.
Address is 12-34-12-34-12-34
Index: 1001, MTU: 1500, Bandwidth: 1g
Address Mode is DHCP
IP Address: 192.168.0.9 Mask: 255.255.255.0
Proxy ARP is disabled
mode
client-identifier
----
-----------------
TEXT
TPS
TEXT
bill
TEXT
steve
– 533 –
Chapter 24
| DHCP Commands
DHCP for IPv4
ip address
command.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents