Show Interfaces Switchport - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Current Status:
Console#
show interfaces
This command displays the administrative and operational status of the specified
switchport
interfaces.
Syntax
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 21.
Console#show interfaces switchport ethernet 1/21
Information of Eth 1/21
Broadcast Threshold
Multicast Threshold
Unknown Unicast Threshold
LACP Status
Ingress Rate Limit
Egress Rate Limit
VLAN Membership Mode
Ingress Rule
Acceptable Frame Type
Native VLAN
Priority for Untagged Traffic : 0
GVRP Status
Allowed VLAN
Forbidden VLAN
802.1Q-tunnel Status
802.1Q-tunnel Mode
Media Type (Combo Forced Mode) : None
Giga PHY Mode
Link Status
Port Operational Status
Operational Speed-Duplex
Flow Control Type
show interfaces switchport [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-12)
– 305 –
Chapter 10
: Master
: Up
: Up
: 100full
: None
: Enabled, 500 packets/second
: Disabled
: Disabled
: Disabled
: Disabled, 1000M bits per second
: Disabled, 1000M bits per second
: Hybrid
: Disabled
: All frames
: 1
: Disabled
:
1(u)
:
: Disable
: NORMAL
| Interface Commands
Interface Configuration

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents