There can be up to 100 candidates and 36 member switches in one cluster.
A switch can only be a Member of one cluster.
Configured switch clusters are maintained across power resets and network
This command enables the switch as a cluster Commander. Use the no form to
disable the switch as cluster Commander.
[no] cluster commander
Once a switch has been configured to be a cluster Commander, it automatically
discovers other cluster-enabled switches in the network. These "Candidate"
switches only become cluster Members when manually selected by the
administrator through the management station.
Cluster Member switches can be managed through a Telnet connection to the
Commander. From the Commander CLI prompt, use the
command to connect to the Member switch.
– 133 –
| System Management Commands