Chapter 21
| LLDP Commands
lldp med-tlv med-cap
lldp med-tlv
network-policy
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv location
Console(config-if)#
This command configures an LLDP-MED-enabled port to advertise its Media
Endpoint Device capabilities. Use the no form to disable this feature.
Syntax
[no] lldp med-tlv med-cap
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises LLDP-MED TLV capabilities, allowing Media Endpoint and
Connectivity Devices to efficiently discover which LLDP-MED related TLVs are
supported on the switch.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv med-cap
Console(config-if)#
This command configures an LLDP-MED-enabled port to advertise its network
policy configuration. Use the no form to disable this feature.
Syntax
[no] lldp med-tlv network-policy
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises network policy configuration information, aiding in the
discovery and diagnosis of VLAN configuration mismatches on a port. Improper
network policy configurations frequently result in voice quality degradation or
complete service disruption.
– 510 –