Description - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Chapter 10
| Interface Commands
Interface Configuration

description

Default Setting
100BASE-FX: 100full (SFP)
1000BASE-T: 10half, 10full, 100half, 100full, 1000full
1000BASE-SX/LX/LH (SFP): 1000full
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The 1000BASE-T standard does not support forced mode. Auto-negotiation
should always be used to establish a connection over any 1000BASE-T port or
trunk.
When auto-negotiation is enabled with the
will negotiate the best settings for a link based on the capabilities command.
When auto-negotiation is disabled, you must manually specify the link
attributes with the
speed-duplex
Example
The following example configures Ethernet port 5 capabilities to include 100half
and 100full.
Console(config)#interface ethernet 1/5
Console(config-if)#capabilities 100half
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#
Related Commands
negotiation (299)
speed-duplex (300)
flowcontrol (297)
This command adds a description to an interface. Use the no form to remove the
description.
Syntax
description string
no description
string - Comment or a description to help you remember what is attached
to this interface. (Range: 1-64 characters)
Default Setting
None
and
flowcontrol
– 296 –
negotiation
command, the switch
commands.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents