Motorola EX-3524 Cli Reference Manual page 515

Example
Note that an IP phone or other end-node device which advertises LLDP-MED
capabilities must be connected to the switch for information to be displayed in the
"Device Class" field.
Console#show lldp info remote-device
LLDP Remote Devices Information
Interface Chassis ID
--------- ----------------- ----------------- ---------------------
Eth 1/1 00-1A-7E-AC-2B-12 00-1A-7E-AC-2B-13
Console#show lldp info remote-device detail ethernet 1/1
LLDP Remote Devices Information Details
---------------------------------------------------------------
Local Port Name
Chassis Type
Chassis ID
Port ID Type
Port ID
System Name
System Description
Port Description
System Capabilities Supported : Bridge
System Capabilities Enabled
Remote Management Address:
192.168.0.2 (IPv4)
Remote Port VID : 1
Remote Port Protocol VLAN:
VLAN 2 : supported, enabled
Remote VLAN Name :
VLAN-1 : DefaultVlan
VLAN 2 : RARP vlan
Remote Protocol Identity (Hex) :
88-CC
Remote Power via MDI:
Remote power class
Remote power MDI supported
Remote power MDI enabled
Remote power pair controllable : No
Remote power pairs
Remote power classification
Remote Link Aggregation:
Remote link aggregation capable : Yes
Remote link aggregation enable
Remote link aggregation port ID : 0
Remote Max Frame Size : 1518
Console#
Port ID
: Eth 1/1
: MAC Address
: 70-72-CF-95-DC-46
: MAC Address
: 70-72-CF-95-DC-48
:
: EX-3524 Managed POE/POE+ Switch
: Ethernet Port on unit 1, port 2
: Bridge
: PSE
: Yes
: Yes
: Spare
: Class 1
: No
– 515 –
Chapter 21
| LLDP Commands
System Name