Ip Igmp Snooping Querier; Ip Igmp Snooping Router-Alert-Option-Check - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Chapter 20
| Multicast Filtering Commands
IGMP Snooping
ip igmp snooping
querier
ip igmp snooping
router-alert-
option-check
Command Mode
Global Configuration
Command Usage
When proxy reporting is enabled with this command, the switch performs
"IGMP Snooping with Proxy Reporting" (as defined in DSL Forum TR-101, April
2006), including last leave, and query suppression. Last leave sends out a proxy
query when the last member leaves a multicast group, and query suppression
means that specific queries are not forwarded from an upstream multicast
router to hosts downstream from this device.
If the IGMP proxy reporting is configured on a VLAN, this setting takes
precedence over the global configuration.
Example
Console(config)#ip igmp snooping proxy-reporting
Console(config)#
This command enables the switch as an IGMP querier. Use the no form to disable it.
Syntax
[no] ip igmp snooping querier
Default Setting
Disabled
Command Mode
Global Configuration
If enabled, the switch will serve as querier if elected. The querier is responsible
for asking hosts if they want to receive multicast traffic.
Example
Console(config)#ip igmp snooping querier
Console(config)#
This command discards any IGMPv2/v3 packets that do not include the Router
Alert option. Use the no form to ignore the Router Alert Option when receiving
IGMP messages.
Syntax
[no] ip igmp snooping router-alert-option-check
– 462 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents