| System Management Commands
Password Threshold : 3 times
: 600 sec.
: 300 sec.
: 30 sec.
This section describes commands used to configure event logging on the switch.
Table 17: Event Logging Commands
This command sets the facility type for remote logging of syslog messages. Use the
no form to return the type to the default.
logging facility type
no logging facility
type - A number that indicates the facility used by the syslog server to
dispatch log messages to an appropriate service. (Range: 16-23)
Sets the facility type for remote logging of syslog messages GC
Limits syslog messages saved to switch memory based on
Adds a syslog server host IP address that will receive
Controls logging of error messages
Limits syslog messages saved to a remote server based on
Clears messages from the logging buffer
Displays log messages
Displays the state of logging
– 110 –