4
Device Designation
System Management
Commands
The system management commands are used to control system logs, passwords,
user names, management options, and display or configure a variety of other
system information.
Table 8: System Management Commands
Command Group
Device Designation
System Status
Frame Size
File Management
Line
Event Logging
SMTP Alerts
Time
(System Clock)
Time Range
Switch Clustering
This section describes commands used to configure information that uniquely
identifies the switch.
Table 9: Device Designation Commands
Command
hostname
snmp-server contact
snmp-server location
Function
Configures information that uniquely identifies this switch
Displays system configuration, active managers, and version
information
Enables support for jumbo frames
Manages code image or switch configuration files
Sets communication parameters for the serial port, including baud rate
and console time-out
Controls logging of error messages
Configures SMTP email alerts
Sets the system clock automatically via NTP/SNTP server or manually
Sets a time range for use by other functions, such as Access Control Lists
Configures management of multiple devices via a single IP address
Function
Specifies the host name for the switch
Sets the system contact string
Sets the system location string
– 81 –
Mode
GC
GC
GC