Supplicant Commands; Dot1X Identity Profile; Dot1X Max-Start - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Supplicant Commands

dot1x identity profile

dot1x max-start

This command sets the dot1x supplicant user name and password. Use the no form
to delete the identity settings.
Syntax
dot1x identity profile {username username | password password}
no dot1x identity profile {username | password}
username - Specifies the supplicant user name. (Range: 1-8 characters)
password - Specifies the supplicant password. (Range: 1-32 characters)
Default
No user name or password
Command Mode
Global Configuration
Command Usage
The global supplicant user name and password are used to identify this switch as a
supplicant when responding to an MD5 challenge from the authenticator. These
parameters must be set when this switch passes client authentication requests to
another authenticator on the network (see the
page
210).
Example
Console(config)#dot1x identity profile username steve
Console(config)#dot1x identity profile password excess
Console(config)#
This command sets the maximum number of times that a port supplicant will send
an EAP start frame to the client before assuming that the client is 802.1X unaware.
Use the no form to restore the default value.
Syntax
dot1x max-start count
no dot1x max-start
count - Specifies the maximum number of EAP start frames.
(Range: 1-65535)
Default
3
Chapter 7
dot1x pae supplicant
– 209 –
| Authentication Commands
802.1X Port Authentication
command on

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents