Show Logging Sendmail; Time; Table 22: Time Commands - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Chapter 4
| System Management Commands

Time

show logging
sendmail
Time
Command Usage
You may use an symbolic email address that identifies the switch, or the address of
an administrator responsible for the switch.
Example
Console(config)#logging sendmail source-email bill@this-company.com
Console(config)#
This command displays the settings for the SMTP event handler.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show logging sendmail
SMTP servers
-----------------------------------------------
192.168.1.19
SMTP Minimum Severity Level: 7
SMTP destination email addresses
-----------------------------------------------
ted@this-company.com
SMTP Source Email Address: bill@this-company.com
SMTP Status: Enabled
Console#
The system clock can be dynamically set by polling a set of specified time servers
(NTP or SNTP). Maintaining an accurate time on the switch enables the system log
to record meaningful dates and times for event entries. If the clock is not set, the
switch will only record the time from the factory default set at the last bootup.

Table 22: Time Commands

Command
SNTP Commands
sntp client
sntp poll
sntp server
show sntp
Function
Accepts time from specified time servers
Sets the interval at which the client polls for time
Specifies one or more time servers
Shows current SNTP configuration settings
– 120 –
Mode
GC
GC
GC
NE, PE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents