Power Inline Maximum Allocation - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

power inline
maximum allocation
Command Mode
Interface Configuration (Ethernet ports 1-24/48)
Command Usage
The switch only provides power to the Fast Ethernet or Gigabit Ethernet
copper-media ports.
When detection is enabled for PoE-compliant devices, power is automatically
supplied when a device is detected on the port, providing that the power
demanded does not exceed the port's power budget or the switch's power
budget.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#power inline
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#no power inline
Console(config-if)#
Related Commands
time-range (128)
This command limits the power allocated to specific ports. Use the no form to
restore the default setting.
Syntax
power inline maximum allocation milliwatts
no power inline maximum allocation
milliwatts - The maximum power budget for the port.
(Range: 3000 - 34200 milliwatts)
Default Setting
34200 milliwatts
Command Mode
Interface Configuration (Ethernet ports 1-24/48)
Command Usage
All the RJ-45 ports support the IEEE802.3at-2009 PoE standard. The total PoE
power delivered by all ports cannot exceed the 390/779
This means that up to 11/22
simultaneously to connected devices (802.3at), up to 24/48
up to 15.4W (802.3af ).
7.
Values for EX-3524 and EX-3548.
Chapter 12
7
ports can supply a maximum 34.2W of power
– 327 –
| Power over Ethernet Commands
7
Watts power budget.
7
ports can supply

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents