Username; Table 33: Default Login Settings - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

username

This command adds named users, requires authentication at login, specifies or
changes a user's password (or specify that no password is required), or specifies or
changes a user's access level. Use the no form to remove a user name.
Syntax
username name {access-level level | nopassword | password {0 | 7} password}
no username name
name - The name of the user. (Maximum length: 8 characters, case sensitive.
Maximum users: 16)
access-level level - Specifies the user level.
The device has two predefined privilege levels:
0: Normal Exec, 15: Privileged Exec.
nopassword - No password is required for this user to log in.
{0 | 7} - 0 means plain password, 7 means encrypted password.
password password - The authentication password for the user.
(Maximum length: 32 characters plain text or encrypted, case sensitive)
Default Setting
The default access level is Normal Exec.
The factory defaults for the user names and passwords are:

Table 33: Default Login Settings

username
guest
motorola
Command Mode
Global Configuration
Command Usage
The encrypted password is required for compatibility with legacy password
settings (i.e., plain text or encrypted) when reading the configuration file during
system bootup or when downloading the configuration file from an FTP/TFTP
server. There is no need for you to manually configure encrypted passwords.
Example
This example shows how the set the access level and password for a user.
Console(config)#username bob access-level 15
Console(config)#username bob password 0 smith
Console(config)#
Chapter 7
access-level
0
15
– 167 –
| Authentication Commands
User Accounts
password
guest
admin

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents