15
mac-address-table
aging-time
Address Table Commands
These commands are used to configure the address table for filtering specified
addresses, displaying current entries, clearing the table, or setting the aging time.
Table 78: Address Table Commands
Command
Function
mac-address-table
Sets the aging time of the address table
aging-time
mac-address-table static
Maps a static address to a port in a VLAN
clear mac-address-table
Removes any learned entries from the forwarding
dynamic
database
show mac-address-table
Displays entries in the bridge-forwarding database PE
show mac-address-table
Shows the aging time for the address table
aging-time
show mac-address-table
Shows the number of MAC addresses used and the
count
number of available MAC addresses
This command sets the aging time for entries in the address table. Use the no form
to restore the default aging time.
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-844/672
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding information.
8.
Values for EX-3524 and EX-3548.
– 361 –
Mode
GC
GC
PE
PE
PE
8
seconds; 0 to disable aging)