Motorola EX-3524 Cli Reference Manual page 71

Table 6: Command Group Index
Command Group
VLANs
Class of Service
Quality of Service
Multicast Filtering
Link Layer Discovery
Protocol
Cisco Discovery Protocol
Domain Name Service
Dynamic Host
Configuration Protocol
IP Interface
IP Routing
The access mode shown in the following tables is indicated by these abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
GC (Global Configuration)
IC (Interface Configuration)
IPC (IGMP Profile Configuration)
LC (Line Configuration)
MST (Multiple Spanning Tree)
NE (Normal Exec)
PE (Privileged Exec)
PM (Policy Map Configuration)
VC (VLAN Database Configuration)
Chapter 2
(Continued)
Description
Configures VLAN settings, and defines port membership for
VLAN groups; also enables or configures private VLANs,
protocol VLANs, voice VLANs, and QinQ tunneling
Sets port priority for untagged frames, selects strict priority or
weighted round robin, relative weight for each priority queue,
also sets priority for DSCP
Configures Differentiated Services
Configures IGMP multicast filtering, query, profile, and proxy
parameters; specifies ports attached to a multicast router; also
configures multicast VLAN registration
Configures LLDP settings to enable information discovery
about neighbor devices
Configures CDP settings to enable information discovery
about neighbor devices
Configures DNS services.
Configures DHCP client functions
Configures IP address for the switch interfaces; also
configures ARP parameters and static entries
Configures static unicast routing
– 71 –
| Using the Command Line Interface
CLI Command Groups
Page
393
429
441
459
493
517
523
531
537
573